Skip to content

Anzena Club — −10% on your first order with CLUB10 (Club account)

Anzena

Frames · 6 min

Frames for photos: how to pick the right size

Frames for photos guide. 9×13, 10×15, 11×15, 13×18 and 4-pose photobooth. Why a décor frame is not enough, what the Anzena bumper changes, and how to insert paper photos.

Anzena frames for paper photos

You want frames for photos. Paper prints scratch, yellow in UV and jam in a standard frame that is too deep. This guide picks the size, explains the gap with a décor frame, and shows how to insert paper photos.

Why paper photos needs a dedicated frame

Paper prints scratch, yellow in UV and jam in a standard frame that is too deep.

A standard photo frame is too deep, the pane too thin, and the size is almost never that of paper photos.

Anzena frames for paper photos
Acrylic bumper: the frame that filters UV.

What really damages paper photos

  • Daylight and spot UV
  • Handling scratches
  • Play in a frame that is too large
  • Dust and fingerprints on a piece you want visible

What the bumper changes

The Anzena bumper is the frame: acrylic UV filter > 96 %, click close, optional FlexLock back.

  • Dedicated size — 9×13, 10×15, 11×15, 13×18 and 4-pose photobooth
  • Acrylic UV filter
  • Click, no screwdriver
  • Optional FlexLock magnetic back

How to insert paper photos

Four gestures, the same on every size.

  1. 01Open the bumper with a click.
  2. 02Slide paper photos in flat, without a thick inner.
  3. 03Click shut. No more finger on the surface.
  4. 04Set down, magnet (FlexLock) or hang on FlexWall.
Insert paper photos into an Anzena bumper
Open, slide, click, stop touching the original.

Which frame

Match the size: 9×13, 10×15, 11×15, 13×18 and 4-pose photobooth.

FAQ

Is this an IKEA frame?+

No. An Anzena acrylic bumper, made in France in Antibes.

Can I hang it?+

Yes, with a FlexLock back and a FlexWall rail.

Anzena Club

Get 10% off and atelier drops.

Subscribe: CLUB10 after confirmation, plus bumper & FlexWall releases.

Besoin d’un format précis ?

Décrivez votre pièce — on vous oriente vers le bumper, le FlexWall ou un projet Factory.