Protection for photobooth: UV, size, insertion

Protection for photobooth: A photobooth print is too thin for a décor frame and too precious for a shoebox. This guide covers the Anzena acrylic layer — not a soft sleeve.

What makes photobooth and photomaton prints fragile

A photobooth print is too thin for a décor frame and too precious for a shoebox.

Anzena protection blocks UV, handling scratches and dust while keeping photobooth and photomaton prints visible.

The real enemies of photobooth and photomaton prints

• Cumulative UV
• Finger and drawer scratches
• Humidity haze on optical surfaces
• Wrong size: too much play or too much pressure

Anzena protection

Acrylic bumper in the size of photobooth and photomaton prints. FlexLock, engraving, Polaroid lots. Not a one-size accessory.

• Acrylic UV > 96 %
• Millimetre fit — 4-pose photomaton and Instax / Polaroid lots
• Click, no screws
• Made in France

How to protect photobooth and photomaton prints in the bumper

The gesture is the same across the catalogue.

1. 01Pick the bumper for the exact size.
2. 02Open with a click.
3. 03Slide photobooth and photomaton prints in without forcing.
4. 04Close. Check there is no play.

Pick the right protection

Size first: 4-pose photomaton and Instax / Polaroid lots.